Starterkit-T335
Navigate
This starterkit is no longer available for new designs. We can discuss your requirements and recommend a kit suitable for you – please get in touch to discuss your embedded display requirements!
Starterkit-T335
A8
The Starterkit-T335 is an all in one embedded solution with multi-touch display. The platform comprises high-performance PCAP multi-touch TFT displays pre-integrated with a Texas Instrument T335 single-core Cortex-A8 CPU module and is supported by a Linux Operating System. The 3D graphics accelerator and multiple OS support makes this a very good entry level HMI controller.
The full technical Starterkit documentation and Quick Start Guide can be found under the 'Downloads' Tab.
- 4.3" WQVGA or 7" WVGA display
- Projected Capacitive Touchscreen
- ARM Cortex-A8 CPU
- Up to 512MB DDR3 and Up to 1GB NAND
- Linux OS
| Feature | Specification | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CPU Architecture | ARM Cortex A8 | ||||||||||||||||||
| CPU Manufacturer | Texas Instruments | ||||||||||||||||||
| CPU Model | AM3354 Single Core | ||||||||||||||||||
| CPU Frequency | Up to 600MHz | ||||||||||||||||||
| Graphics | PowerVR SGX530 | ||||||||||||||||||
| Memory | Up to 512MB DDR3 | ||||||||||||||||||
| Onboard Storage | Up to 1GB NAND | ||||||||||||||||||
| Display Options |
| ||||||||||||||||||
| Display Interface | DVI LVDS Parallel RGB | ||||||||||||||||||
| Display Resolution (Max) | 1366x768 | ||||||||||||||||||
| Ethernet Ports | *1 | ||||||||||||||||||
| WIFI | *802.11b/g/n | ||||||||||||||||||
| USB 2.0 OTG | 1 | ||||||||||||||||||
| USB 2.0 Ports Host | Up to 4 | ||||||||||||||||||
| GPIO | Up to 8 | ||||||||||||||||||
| CANBus | 1 | ||||||||||||||||||
| I2C | 2 | ||||||||||||||||||
| SPI | 1 | ||||||||||||||||||
| Power Supply Voltage | 12V | ||||||||||||||||||
| Dimensions | 130 x 93 x 17 | ||||||||||||||||||
| OS Support | Linux |
* Optional feature available on this product
| Document | Description |
|---|---|
| Block diagram | Block diagram for SBC-T335 |
| Block diagram | Block diagram for 4.3" PCAP TFT Display module SCX0403C32GGC06 |
| Block diagram | Block diagram for 7.0" PCAP TFT display module SCF0700C48GGU33 |
The Starterkit-T335 consists of the following:
- 1 x Quick Start Guide
- DX-1 Carrier board
- TI AM335x based Core Module
- Accessory Package for DX1 range
- PCAP TFT Display of your choice: 4.3" or 7"
- Display Interface Kit
* other configurations available on request
Send Enquiry| Document | Description |
|---|---|
| DX1B-T335-SBC-Datasheet | Datasheet |
| Quick-start-guide-Starterkit-T335-v.3 | Quick start guide |
| 7" PCAP TFT Display module | Datasheet |
| 4.3" PCAP TFT Display module | Datasheet |
Embedded Displays Systems that meet your needs exactly
At Anders we understand that no two customers are the same, which is why we specialise in custom embedded displays solutions and offer a unique products tailored to the end application.
From the Optical performance enhancements, Touch and firmware tuning, right trough the Mechanical Integration discover how we can make your embedded system just as you need it to be.
Design ServicesSupport
For more technical details, please visit the Starterkit-T335 Product Wiki Page here
Go to WikiFor customers who have already purchased one of our starter kits and would like support on their product, please click here to access our Customer Support Portal
Contact Support